الوصف
1/2″ Male Thread Water Solenoid Valve 12V Normal Closed Plastic Valve Drinking Water Controller Switch
Valve 12V Solenoid Valve 1/2 Inch
It is a solenoid valve that will allow you to control liquid flow with electronic circuits.
In normal condition, the valve is in the closed position, when 12V is applied to its terminals, it opens and allows liquid passage.
It has a 1/2″ wide NPT type pipe connection.
A minimum pressure of 0.02 Mpa (3 psi) is required for the seals to be fully opened and the fluid to flow inside the valve.
When using with microcontrollers, it is recommended to set up a driver circuit with a BDX53C or similar N-type transistor and a 1N4007-like diode.
Features:
Working pressure: 0.02 Mpa – 0.8 Mpa
Operating temperature: 1 ℃ – 75 ℃
Valve opening time: ≤ 0.15 sec
Valve closing time: ≤ 0.3 sec
Operating voltage: 12VDC (can also be used with 6V)
Working life: ≥ 50 million on-off
Weight: 122gr
Dimensions: 76.2 x 57.15 x 50.8 (mm)
المراجعات
لا توجد مراجعات بعد.